Super High Flow High Speed PETG are now available in black, white, red, and bright green
Highly glossy surface finish
Shorten your print time by up to 70%
More colors are coming later this year
Below are the printing parameters to start with
Nozzle Temperature: 220-270C
Bed Temperature: 70-90C
Acceleration 10,000-20,000 mm/s2
Max volumetric speed up to 35 mm³/s at 270C (as limited by hotend, you might need to lower the number to 30 mm³/s for X1C and 25 mm³/s for older printers)
Maximum volumetric speed testing result:
35 mm³/s for 0.4mm nozzle at 270C (35 mm³/s on A1 with factory stainless steel nozzle, 29-31mm³/s on X1C with factory stainless steel nozzle, 35 mm³/s with aftermarket highflow nozzle)
37 mm³/s on A1 with factory 0.6mm hardened steel nozzle at 270C
40 mm³/s on A1 with factory 0.8mm hardened steel nozzle at 270C
Technical Specifications:
- Filament:
- Diameter: 1.75mm
- Tolerance: ±0.02mm
- Density: 1.29 g/cm³
- Appx Length on Spool: 320 meters
- Spool Dimensions:
- Outer Dimension of Spool: 200mmx60mm
- Inner Hole Diameter: 58mm
- Recommended Temps:
- Print Temperature: 220-270°C
- Recommended Bed Temperature: 70-90C
