Made in USA with Natureworks 3D870 Resin
Heat deflection temperature >100C after annealing or 65-70C as printed
1. Oven method: 110–120°C for 30-60 min. The oven needs to be preheated before loading the parts in and the oven shall be shut down to let the parts cool down slowly. In addition, the temperature needs to be precisely controlled. A normal household oven is not recommended
2. Boiling method: seal the parts in bag and anneal in boiling water for at least 60 mins then let it cool down slowly. Please make sure the bag is sealed, not floating, and the parts are not in contact with water.
Technical Specifications:
- Filament:
- Diameter: 1.75mm
- Tolerance: ±0.02mm
- Density: 1.24 g/cm³
- Appx Length on Spool: 320 meters
- Spool Dimensions:
- Outer Dimension of Spool: 200mmx60mm
- Inner Hole Diameter: 58mm
- Recommended Temps:
- Print Temperature: 200-230°C
- Recommended Bed Temperature: optional
- Recommended Build Surface:
- PEI
- Microporous Coated Glass
- Painters Tape
- Glue Stick or Hairspray on Glass (use caution with adhesives as PLA may adhere very well)
All colors for illustrative purposes only. Remember, we offer a 30 day money back guarantee for unopened filament - if you are unhappy with the shade of your filament, please contact us immediately to request a refund or replacement.
