Aluminum Heated Bed w/ 3mm Coated Glass Plate (24v) - 500mm x 500mm

(1 review) Write a Review

 *****This Heated Bed is mislabeled physically.  It shows that it is 12V but it has been tested and is 24V as it should be.*****  

500mm Print area Heated Bed Kit

  • Usable size: 500x500mm
  • Blue Film protects the surface of the Aluminum plate
  • Voltage - 24V
  • Outside dimension: 510x510 mm
  • Usable size: 500x500mm (with Glass)
  • 480 Watt
  • 500x500 microporous coated glass (be sure to let the bed cool down before removing the print to avoid damage to bed's coating)
  • Max temp rated at 110c
Refer to the hole spacing photo for mounting holes.

This premium bed is a 24V heated bed with High Temp silicon wires and 100K Thermistor.  

500x500 microporous coated glass allows you to attach the glass to the bed via adhesive backing.

Bed Hardware Included!  4 - M3x35 Screws with washers and nuts.

1 Review Hide Reviews Show Reviews

  • 5

    Posted by Lynn Austin on Jan 26th 2020

    I am using a 24v 600w 25a power supply with a MKS Mosfet. Takes about 2 minutes to heat to 60 Celsius. It is 24 volt as stated. Works great.

Get the latest updates on new products and upcoming sales