ZYLtech Toshiba TB6600 Driver Instructions

Overview

  • The TB6600HG is a PWM chopper-type single-chip bipolar sinusoidal micro-step stepping motor driver.
  • Forward and reverse rotation control is available with 2-phase, 1-2-phase, W1-2-phase, 2W1-2-phase, and 4W1-2-phase excitation modes.
  • 2-phase bipolar-type stepping motor can be driven by only clock signal with low vibration and high efficiency.
tb6600.png

Features

  • Single-chip bipolar sinusoidal micro-step stepping motor driver
  • Ron (upper + lower) = 0.4 Ω (typ.)
  • Forward and reverse rotation control available
  • Selectable phase drive (1/1, 1/2, 1/4, 1/8, and 1/16 step)
  • Output withstand voltage: Vcc = 50 V
  • Output current: IOUT = 5.0 A (absolute maximum ratings, peak)
  • IOUT = 4.5 A (operating range, maximal value)
  • Packages: HZIP25-P-1.00F
  • Built-in input pull-down resistance: 100 kΩ (typ.), (only TQ terminal: 70kΩ(typ.))
  • Output monitor pins (ALERT): Maximum of IALERT = 1 mA
  • Output monitor pins (MO): Maximum of IMO = 1 mA
  • Equipped with reset and enable pins
  • Stand by function
  • Single power supply
  • Built-in thermal shutdown (TSD) circuit
  • Built-in under voltage lock out (UVLO) circuit
  • Built-in over-current detection (ISD) circuit

Wiring Diagram 1 (With Stand-Alone Breakout Board)

Wiring diagram with stand alone breakout board, such as mach3, USB CNC. It is suggested that ENA (enable) is left disconnected.

tb660-wiring-1.png
Wiring diagram (with stand alone breakout board)

Wiring Diagram 2 (With Arduino CNC Shield)

Wiring diagram with Arduino CNC shield. It is suggested that ENA (enable) is left disconnected.

tb6600-orig.jpg
Wiring diagram (with Arduino CNC shield)

Get the latest updates on new products and upcoming sales