ZYLtech PLA Wood: – contains 12% wood fiber and is easy to print without clogging or the need for a larger nozzle. The wood has color close to pine and smells like wood during printing. It is NOT intended for staining. Recommended temps: 195°C – 220°C.
ZYLtech PLA Wood+: contains more wood (20% w/w) and will require a larger nozzle, such as a 0.5mm or 0.8mm, to allow the wood fibers to pass through easily. The high wood content and lighter base color makes it perfect for staining with various wood dyes or stains. Printing with a smaller nozzle will more than likely result in a clog if your temps and retractions settings are not tuned to accommodate this filament. It is possible but the chances are high for clogging. Recommended temps: 200°C – 220°C. The photo below shows staining result with cedar wood stain.
All colors for illustrative purposes only. Remember, we offer a 30 day money back guarantee for unopened filament - if you are unhappy with the shade of your filament, please contact us immediately to request a refund or replacement.