ZYLtech HyperCube Full DIY Kit - 200mm Cubic Build Volume

$309.95 - $319.95
(No reviews yet) Write a Review

Full Unassembled HyperCube Kit - 200mm Cubic Build Volume - Natural or Black Anodized

Visit the ZYLtech HyperCube Users group on Facebook for help and to see what other ZYLtech HyperCube users are up to!

Additional helpful links and files (including the 3d printed parts needed to assemble the ZYLtech HC) can be found on the ZYLtech HyperCube Product and Information page.
Please note - though there is a ton of support in the 3d printing community for the HyperCube and DIY 3d printers in general, we do not suggest the ZYLtech HyperCube as a first printer. We strongly recommend that only experienced 3d printing hobbyists and professionals consider purchasing any of the ZYLtech HyperCube kits. Please also note that we are unable to provide anything more than basic support, and that will primarily be for the purpose of directing you to the plethora of free resources in the DIY 3d printing community, many of which are linked above.
HyperCube 200mm Frame Kit (available in natural aluminum or black anodized)
HyperCube 200mm Drive System Kit
HyperCube 200mm Electronics Kit

This Complete Unassembled Kit Includes the Following Components:

Frame Kit
2020 Aluminum Extrusion
  • 4x 340mm (X)
  • 4x 303mm (Y)
  • 4x 350mm (Z)
  • 2x 285mm (Bed)
  • 1x 135mm (Bed)
  • 100x M5 hammer nuts
  • 100x button head M5x8
  • ​30x 90 degree bracket
Drive System Kit
  • 2 x 8mmx300mm Hardened Steel smooth rod for Y axis
  • 2 x 8mmx350mm Hardened Steel smooth rod for Z axis
  • 2 x 10mmx360mm Carbon Fiber tube for X axis
  • 4 x Igus JSM-1012-10
  • 4 x LM8UU linear bearing for Z axis
  • 1 x T8x8 300mm Lead Screw
  • 2 x LM8LUU linear bearing for Y axis
  • 1 x Brass T8x8 Anti-Backlash Nut (common flange)
  • 1 x 5mm/8mm Aluminium Flexible Shaft Coupler
  • 16 x F623ZZ Flange Bearing
  • 1 x 5M GT2 Belt
  • 2 x 2GT-20 Teeth Timing Pulley
  • 1 x 1m PTFE Tube
  • 1 x Push Fit Connector M6
  • ​45 x M3 x 10mm pan head screws ​
  • 45 x M3 x 20mm pan head screws 
  • 2 x M3 x 6mm pan head screws
  • 35 x M3 Nyloc nuts
  • 35 x M3 Hex nuts 
  • 2 x M3 x 35mm pan head screws
Motors, Electronics, & Accessories Kit
  • 4x Nema 17 Stepper Motor 1.5 A, 0.42 Nm, 59 ozin
  • 3x Mechanical Endstop Switch
  • 1x ZYLtech RAMPS 1.4 3D Printer Shield
  • 1x ZYLtech MEGA 2560 R3 Board ATMEGA16U2
  • 1x ZYLtech RAMPS 1.4 3D Pinter 12864 LCD Smart Controller
  • 4x DRV8825 Stepper Motor Driver Module + Heat Sinks
  • 1x 12V DC 50mm Radial Cooling Fan
  • 1x 3mm 200mm x 200mm Aluminum Heat Bed (pre-soldered, including bed surface mounted LED w/ resistor)
  • 1x 12V 30A 360W Power Supply Unit
  • 2m 12 AWG Silicon Wire X2 (Black/Red)
  • 10m 18AWG 4 Conductor Shielded Wire
  • 6x Bed Levelling Kit (Screw/Spring/Knob)
  • 1x 100k Thermistor w/ Kapton Tape
  • 1x ZYLtech E3Dv6 Clone Kit 
  • 1x Inductive Proximity Sensor LJ12A3-4-Z/BY PNP DC6-36V
  • 1x Power Switch/Connector
  • 1x 210A MOSFET (heated bed power expansion module)
  • 1x Extruder Assembly Kit
  • 4x M3x14 (for hot end fan)
  • 2x M4x8 + 2x M4 Hammer Nuts (for extruder mount)
  • 2x M3x6 (for Y endstop)

Get the latest updates on new products and upcoming sales