Unassembled kit includes motors, electronics, and accessories for the HyperCube. (Frame and drive system parts not included.)
Please allow 3-7 business days to process your order (plus shipping time). You will receive an automated email notifying you once your order has been processed.
(Updated as of 5-7-18)
Visit the ZYLtech HyperCube Users group on Facebook for help and to see what other ZYLtech HyperCube users areup to!
Additional helpful links and files (including the 3d printed parts needed to assemble the ZYLtech HC) can be found on the ZYLtech HyperCube Product and Information page.
HyperCube Motors, Electronics, & Accessories Kit - 300mm Cubic Build Volume w/ Dual Z
Please note - though there is a ton of support in the 3d printing community for the HyperCube and DIY 3d printers in general, we do not suggest the ZYLtech HyperCube as a first printer. We strongly recommend that only experienced 3d printing hobbyists and professionals consider purchasing any of the ZYLtech HyperCube kits. Please also note that we are unable to provide anything more than basic support, and that will primarily be for the purpose of directing you to the plethora of free resources in the DIY 3d printing community, many of which are linked above.
| || |
Included in kit:
- 5x Nema 17 Stepper Motor 1.5 A, 0.42 Nm, 59 ozin
- 3x Mechanical Endstop Switch
- 1x ZYLtech RAMPS 1.4 3D Printer Shield
- 1x ZYLtech MEGA 2560 R3 Board ATMEGA16U2
- 1x ZYLtech RAMPS 1.4 3D Pinter 12864 LCD Smart Controller
- 4x DRV8825 Stepper Motor Driver Module + Heat Sinks
- 1x 12V DC 50mm Radial Cooling Fan
- 1 x 3mm 300mm x 300mm Aluminum Heat Bed (Standard or Premium Heated Bed options available - see below)
- 1x 12V 30A 360W Power Supply Unit
- 2m 14 AWG Silicon Wire X2 (Black/Red)
- 10m 18AWG 4 Conductor Shielded Wire
- 6x Bed Levelling Kit (Screw/Spring/Knob)
- 1x 100k Thermistor w/ Kapton Tape
- 1x ZYLtech E3Dv6 Clone Kit
- 1 x Inductive Proximity Sensor (version dependent upon Heated Bed option selected - see below)
- 1x Power Switch/Connector
- 1x 210A Heated Bed Power Expansion Module MOSFET
- 4x M3x14 (for hot end fan)
- 2x M4x8 + 2x M4 Hammer Nuts (for extruder mount)
- 2x M3x6 (for Y endstop)
Heated Bed Options
Standard Heated Bed includes standard 12v 300mm x 300mm build area aluminum heated bed. No modifications required to the standard ZYLtech HyperCube 300 w/ dual Z frame and drive system builds. Easily customizable and upgradeable. Conveniently pre-soldered with surface-mount LED and resistor.
| |Premium Heated Bed includes the following upgrades over the Standard Heated Bed option:
- Upgraded 220W / 12V Aluminum Heat Bed w/ 300mm x 300mm build area - OEM heat bed for Creality CR-10 3D Printers
- 300mm+ x 300mm+ Borosilicate ("boro") glass
- 300mm x 300mm PEI sheet (pre-installed on boro glass)
- Additional hardware and aluminum extrusion required to modify standard ZYLtech HC 300 w/ Dual Z frame (in order to account for the different hole pattern versus standard bed)
- Upgraded proximity sensor (required due to addition of PEI and boro glass)