10 mm x 10 mm x 10mm Aluminum Heat Sink w/ 3M 8805 Thermal Tape
Great choice for small chips (such as for Bitcoin Litecoin ASIC)
12 pieces per order
Below are the available bulk discount rates for each individual item when you purchase a certain amount
10 mm x 10 mm x 10mm Aluminum Heat Sink w/ 3M 8805 Thermal Tape
Great choice for small chips (such as for Bitcoin Litecoin ASIC)
12 pieces per order
I purchased a 12 pc package of 10 mm aluminum self adhesive heatsinks for use in a heat sensitive project I am building. The board I am using has two chips that benefit greatly from the application of heatsinks, although it it quite capable of running for long periods without them. On unpacking, I first looked at the design and quality of machining on the simple aluminum heatsinks. The design is quite simple, with adequate channels for airflow, and good machining finishes. I normally don't have very good luck with anything self adhesive, but one chip required 4 heatsinks to cover it, and all 4 stuck well on the first try. The other chip only required one to cover it, and again, it stuck well on the first try. Now I need more projects that require heatsinks so I have a use for the remaining 7! After a short torture test, both chips were running roughly 8 to 9 degrees C cooler than without them, making these an excellent value. I'm sure if I added a small fan to blow across them, the temperature difference would be even greater, but they are doing a good job without extra airflow.
Get the latest updates on new products and upcoming sales